Borked wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

1. Firstly get comfortable with the Linux command-line.


2. Clone the repository
<code>
git clone https://github.com/BertoldVdb/jms578flash
</code>

3. Follow it's build guide and build it.

4. Backup it's firmware (in case you mess something up)
<code>
sudo ./jms578flash -extract -firmware backup.bin
</code>

5. Update to your desired firmware:
<code>
sudo ./jms578flash -flash -firmware firmware.bin
</code>



You can try out the two firmware's that are in this zip file: {{updated_jms578_firmware.zip?linkonly}}

But if they don't work you also might need to force the device to be recognized as a UAS drive. Run AS ROOT.

<code>
echo "152d:0578:u" > /sys/module/usb_storage/parameters/quirks
</code>

To make this change permanent, put the following into ''/etc/modprobe.d/jms578-uas.conf''
<file>
options usb_storage quirks="152d:0578:u"
</file>


In case you **really** messed up, here's the original firmware and bootrom from my drive.

{{original_jms578_firmware.zip?linkonly}}